Ok, not much updates for the ATI MMC.

I've done the big upgrade and got the ATI all in wonder x1900 with a digital tuner. Works great. But dabdig doesn't really want to work too well with it. I get the following error:

Error enumerating the registery value under

hkey_current_user\Software\ATI Technologies\Multimedia\Features\TV\Video\analog TV Tuner

If I check the registry, there is no such item... Seems obvious but just to add.

Hopefully this is an easy fix.

To add, I'm using the latest dabdig: 2.57b12

Edited by Andy on Saturday, February 17, 2007 - 9:45:13 AM

Would be interesting if you could queue a recording using the native ATi softwrae and then send me a registry dump from HKEY_CURRENT_USER\Software\ATI Technologies

However, in the meantime - try changing a setting in dabdig.ini from 1 to 0

i.e.

ATiMMCExtraInfo=0

DABDig creator

---

Would be interesting if you could queue a recording using the native ATi softwrae and then send me a registry dump from HKEY_CURRENT_USER\Software\ATI Technologies

However, in the meantime - try changing a setting in dabdig.ini from 1 to 0

i.e.

ATiMMCExtraInfo=0

---

Ok, I have e-mailed you the registry info as requested.

Some changes, have downgraded the ATI MMC from 9.16 to 9.13.

The change in Dabdig.ini, has enabled the recording.

In the ATI all in wonder x1900. there are now more than 1 channel source, you can have defaults with channels from multiple sources.

ie, both analogue & digital. So I can assume that some changes may need to be made in Digiguide?

Channels are numbered 2-3 and so forth.. or 20203 as an example...

Hope this helps in some way.

Andy

Registry dump not yet arrived ... but take a look at the ATiMMCSource setting in dabdig.htm/dabdig.ini

http://www.spidersweb.freeserve.co.uk/dab/dabdig.htm#config-ATiMMC

This is what is used to index into the registry to pick up the extra info - and (in theory at least) you can override it on a per channel basis.

DABDig creator

Humm, will send the data again...

Thanks.

I've now got the one from 17:48

It will be a bit more than changing the setting I referred to above because they have moved some stuff from ...\TV to ...\DTV and added a few more fields - so I will have to spend a bit more time on this.

DABDig creator

I thought that more changes would be required. If you need any further info etc... I'll be happy to provide.

Hiya,

Any progress on the changes for ATI MMC 9.13?

II

did make some good progress a while ago but got interrupted. I will have a go at doing some more over Easterr

DABDig creator

Test version on its way to you

(259b14)

DABDig creator